The Hot Flush machine pumps heated cleaning fluid through the oil cooler, with the direction of flow instantly reversing every 3 seconds for a quarter of a second.
The machine is ran until the 10 Micron check screen on the out-bound flow shows no debris. Hot Flush does not consider an oil cooler clean until nothing larger than 10 Microns in size is coming out of it. Compare this with the filtering efficiency of your average spin-on type, disposable oil filter which is effective down to a particle size of roughly 30 Microns.
Most oil cooler manufacturers have a recommended overhaul interval of every 300 to 400 hours of operation, or every two to three years (whichever comes first). Engine manufacturers generally recommend that the oil cooler be overhauled along with the engine at the end of each TBO (time between overhaul) cycle.
Hot Flush should be used anytime there has been metal contamination of the engine oil, whenever any major engine work has been conducted, or in the event of abnormally high oil temperatures when no other causes can be found.
Anyone who owns or works with heat exchangers or oil coolers can benefit from Hot Flush. The cost saved from costly equipment breakdowns can more than pay for the Hot Flush machine. And, when your reputation is on the line; or customers need to be served; settling for less is simply out of the question.
In addition to saving money via preventive maintenance, Hot Flush uses standard automatic transmission fluid—not an expensive cleaning agent. This alone could more than justify the cost of the Hot Flush machine.
Many of our Hot Flush customers are in the transmission repair industry. Hot Flush helps them by reducing the number of returned vehicles, and by giving them another valuable service that they can monetize. The debris in automotive transmission coolers can easily cause a valve to stick; removing it is therefore essential. And, debris visible on the checkable cleaning screen can be shown to clientele, allowing them to make the decision for further investigation of their problem.
No matter what your industry, being equipped with a Hot Flush machine can help optimize your repair and maintenance processes!
Hot Flush uses a patented process that cleans in a truly superior way. It removes the smallest of particles. It works incredibly fast. It is easy to use. We are here to answer any questions you may have about the machine or how it works. If you are tired of dealing with failures after a fresh build, hot flush can solve your contamination problems. Our patented process works better than anything you’ve ever tried. Guaranteed.
There are many different real-life examples we can share with you if you decide to get in contact. Our previous work and results will help illustrate why Hot Flush delivers a cleaning ability you need for your important application. In addition to a great functioning oil cooler / heat exchanger, Hot Flush is extremely cost effective—able to pay for itself and save you money well into the future. It is a simple, affordable, and effective solution we would be happy to tell you more about!
